Procedure to use WMT Expert as Hot Spot

View previous topic View next topic Go down

Procedure to use WMT Expert as Hot Spot

Post by Vishal Dalal on Thu Jan 09, 2014 7:17 pm

Turn on the WMT Expert.
1. Go to System & than Settings in the WMT Expert.
2. Connect the WMT Expert to one of the server (via Public I.P.) such as 122.160.75.241 and set the client no accordingly say 1 after that set it to protocol version 2.
3. Connect the laptop/desktop to the WMT client via LAN cable from the Management port of the WMT Client.
4. Set the following IP in the laptop/desktop as

            Local Area connection> IPv4>Properties and change the IP of the laptop to the following
            Set IP: 10.0.100.X where X should range from 2-126
            Subnet mask: 255.255.255.128
            Gateway: 10 .0.100.1
            DNS: 8.8.8.8

Do the above changes and then your WMT client will act as a hotspot.

Vishal Dalal

Posts : 1
Join date : 2014-01-06
Age : 34
Location : New Delhi

View user profile

Back to top Go down

Re: Procedure to use WMT Expert as Hot Spot

Post by Guest on Tue Jan 14, 2014 3:23 am

Awesome! Thanks for the post.

Guest
Guest


Back to top Go down

Re: Procedure to use WMT Expert as Hot Spot

Post by jushshrestha on Sat Jan 18, 2014 11:42 am

Thank you for the Hotspot Configuration instruction!

jushshrestha

Posts : 32
Join date : 2013-10-02
Age : 32
Location : Thailand

View user profile

Back to top Go down

Re: Procedure to use WMT Expert as Hot Spot

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum