UNDERSTANDING THE LATENCY SETTINGS ON THE WMT UNITS
3 posters
Page 1 of 1
UNDERSTANDING THE LATENCY SETTINGS ON THE WMT UNITS
It is important that everyone understand the latency settings on the WMT. As you know, there are 5 settings and each as a place for demos and for customers. Please see the summary below:
1. ULTRA LOW (< 1 sec) - This is generally used for audio but it is possible that it may work in the LTE++ with good bandwidth
2. VERY LOW (1.8 sec) - This is considered glass-to-glass industry standard and we promote this as live-to-air of 1.5 sec
3. LOW (2.8 sec) - This is promoted as 2.5 to 3 sec delay
4. MEDIUM (5 sec)
5. HIGH (10 sec)
Please note and understand these settings as it is important for you to communicate the proper information to existing and future customers.
1. ULTRA LOW (< 1 sec) - This is generally used for audio but it is possible that it may work in the LTE++ with good bandwidth
2. VERY LOW (1.8 sec) - This is considered glass-to-glass industry standard and we promote this as live-to-air of 1.5 sec
3. LOW (2.8 sec) - This is promoted as 2.5 to 3 sec delay
4. MEDIUM (5 sec)
5. HIGH (10 sec)
Please note and understand these settings as it is important for you to communicate the proper information to existing and future customers.
Sam- Admin
- Posts : 12
Join date : 2013-09-18
Location : Toronto
Re: UNDERSTANDING THE LATENCY SETTINGS ON THE WMT UNITS
Dear Sir
I also need to know one more thing that when we route the video to netherlands firstly and then show in our client end at that time what is the latency .
My Means to say that some time client ask we need take two output in different locations then what is the Latency.
Thanks
I also need to know one more thing that when we route the video to netherlands firstly and then show in our client end at that time what is the latency .
My Means to say that some time client ask we need take two output in different locations then what is the Latency.
Thanks
shashi sharma- Posts : 31
Join date : 2013-09-20
Age : 34
Location : New Delhi
Re: UNDERSTANDING THE LATENCY SETTINGS ON THE WMT UNITS
If there will be routing through Netherland Server then the latency will increase
The delay will depend on the availability of Bandwidth at Netherland Server
This will not increase latency much but actual duration will be depending upon the bandwidth availability in that duration
You can check the same also
The delay will depend on the availability of Bandwidth at Netherland Server
This will not increase latency much but actual duration will be depending upon the bandwidth availability in that duration
You can check the same also
Similar topics
» UNDERSTANDING THE 3G-S
» WMT VIDEO SETTINGS CAN BE CONFUSING AND NEED TO BE UNDERSTOOD
» Understanding CPT Mode
» UNDERSTANDING ANTENNA SPECS FOR MVP PLATFORM
» UNDERSTANDING THE HOT-SWAP BATTERY PLATE
» WMT VIDEO SETTINGS CAN BE CONFUSING AND NEED TO BE UNDERSTOOD
» Understanding CPT Mode
» UNDERSTANDING ANTENNA SPECS FOR MVP PLATFORM
» UNDERSTANDING THE HOT-SWAP BATTERY PLATE
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|